I-2507 insimbi engenasici 10 * 1mm ibhobho ye-capillary edibeneyo
INGCACISO YOMSEBENZI
I-2507 insimbi engenasici 10 * 1mm ibhobho ye-capillary edibeneyo
Zonke izixhobo zethu ze-super-duplex ziveliswa nguNorsok M-650 Ed.4 kunye/okanye ISO 17782 abavelisi abaqeqeshiweyo.
I-Super Duplex UNS S32750 lelona bakala lixhaphakileyo eliyi-duplex kwimarike.I-UNS S32750 yiduplex eyilelwe ngokukodwa inkonzo kwiindawo ezinobundlobongela ezinekloridi.Inokuxhathisa okulungileyo kakhulu kwi-corrosion yendawo kunye noxinzelelo lwe-corrosion cracking ngokudibanisa namandla aphezulu omatshini.Isetyenziswa kakhulu kwi-oyile kunye negesi, i-hydropower, iinqanawa zoxinzelelo, i-pulp & nephepha, izinto zesakhiwo kunye neetanki zeekhemikhali.
Usetyenziso
I-2507 insimbi engenasici 10 * 1mm ibhobho ye-capillary edibeneyo
Izicelo eziphambili zeenkcukacha ezineemfuno ezikhethekileyo zokumelana nokugqwala okuphezulu.
I-UNS S32750 ibonakaliswe ngolu hlobo:
- Ukuchasana okuphezulu kuxinzelelo lwe-corrosion cracking kwi-halide equkethe iindawo.
- Ukuxhathisa okuphezulu kwimingxuma kunye nokuhlwa kwemingxuma.
- Ukuchasana okuphezulu kwi-corrosion jikelele.
- Amandla omatshini aphezulu.
- Ukuxhathisa okuphezulu kukhukuliseko kunye nokudinwa kwe-corrosion.
Ukushisa Unyango2507 insimbi engenasici 10 * 1mm ebhijelwe iityhubhu ye-capillary
Ukufakwa kwesisombululo kuluhlu lwe-1100 ° C kulandelwa kukucinywa kwamanzi.
Ukuweldability
Kakuhle kakhulu.
I-2507 insimbi engenasici 10 * 1mm ibhobho ye-capillary edibeneyo
Ubume beMichiza (Ingqwalasela yeeBhari)
| Ubunzima % | C | Mn | P | S | Si | Cr | Ni | Mo | Cu | N | NGAPHAMBILI |
| Min. | 24,0 | 6,00 | 3,00 | 0,24 | 41 | ||||||
| Max. | 0,030 | 1,20 | 0,025 | 0,010 | 0,80 | 26,0 | 8,00 | 4,50 | 0,50 | 0,32 |
PREN = % Cr + 3.3 % Mo + 16 % N ≥ 41
ImiGangatho yeeReferensi
Ngokubanzi:
- Norsok M-650 Ed.4 abavelisi abafanelekileyo
- I-PED 2014/68/EU yesiHlomelo I secandelo 4.3
- AD2000 W0 (W2/W10)
- I-NACE MR0175/ ISO 15156-3 kunye ne-NACE MR0103/ISO 17945
- I-2507 insimbi engenasici 10 * 1mm ibhobho ye-capillary edibeneyo
Ipleyiti, iphepha kunye nekhoyili:
- I-ASTM A240, EN 10028-7, EN 10088-2, EN 10088-4, Norsok M-630 MDS D55
Ibha kunye nenkohliso:
- ASTM A276, ASTM A479, ASTM A182, EN 10088-3, Norsok M-630 MDS D54/D57
Ezinye iimveliso:
- Ngokwemigangatho esebenzayo ye-ASTM kunye/okanye EN kunye neNorsok M-630 MDS
Iipropati zoomatshini (Eziqhelekileyo)
| Isivuno samandla Rp0.2, MPa | Amandla okuqina Rm, MPa | Elongation [%] | Ukuqina [HB] | Impembelelo, Charpy-V, -46ºC [J] | |
| IBHA | ≥ 550 | ≥ 750 | ≥ 25 | ≤ 300 | ≥ 65 |
| IPLATE CR (COIL) | ≥ 550 | 750 - 1000 | ≥ 25 | ≤ 310 | ≥ 45 |
| IPLATE HR (COIL) | ≥ 550 | 750 - 1000 | ≥ 25 | ≤ 310 | ≥ 45 |
| Ipleyiti (QUARTO) | ≥ 550 | 750 - 930 | ≥ 25 | ≤ 310 | ≥ 45 |
